Instructions de pressage DTF : maîtrisez votre technique Ignorer et passer au contenu
  1. RAMASSAGE/EXPÉDITION LE JOUR MÊME AVANT 15 H (heure du Pacifique) - LIVRAISON GRATUITE POUR LES ACHATS DE PLUS DE 25 $
  2. AUTOCOLLANTS UV DTF DISPONIBLES MAINTENANT
  3. Livraison nationale gratuite le lendemain pour les commandes de plus de 350 $ ou livraison express gratuite dans le monde entier
SuperDTF Pressing Guide
SuperDTF Ultimate Pressing Guide Professional results every time with our precise settings for all fabric types
Optimal Pressure Settings
Press Pressure The correct pressure is crucial for successful pressing. For all materials, we recommend:
  • Pressure: 60 Lbs - Ideal for all fabric types
Your press should be hard to push down. This ensures even pressure distribution across the fabric without causing damage.
Heat Settings by Material Type
Poly Material Perfect for maintaining the integrity of polyester fabrics while removing wrinkles effectively.
  • Temperature: 275°F / 135°C
  • Duration: 10 Seconds
Tri-Blend Ensures a smooth finish on tri-blend fabrics without overheating.
  • Temperature: 275°F / 135°C
  • Duration: 10 Seconds
50/50 Cotton Poly Achieve crisp lines on mixed fabrics with this precise setting.
  • Temperature: 300°F / 150°C
  • Duration: 12 Seconds
100% Cotton Ideal for pure cotton, balancing heat and time for a perfect press.
  • Temperature: 325°F / 160°C
  • Duration: 10-15 Seconds
Denim Strong and durable setting for effective pressing on denim materials.
  • Temperature: 330°F / 165°C
  • Duration: 15 Seconds
Nylon Gentle pressing for synthetic nylon fabrics to prevent damage.
  • Temperature: 260°F / 125°C
  • Duration: 8-10 Seconds
Silk Delicate setting to protect the luxurious texture of silk fabrics.
  • Temperature: 250°F / 120°C
  • Duration: 7-8 Seconds
Performance Fabrics Special settings for moisture-wicking and athletic fabrics.
  • Temperature: 270°F / 130°C
  • Duration: 8-10 Seconds
Step-by-Step Peel Instructions
  1. Immediate Peel: Peel slowly from the corner immediately after pressing to ensure the material sets properly.
  2. Post-Peel Pressing: Once the film is removed, press with Teflon to eliminate sheen and enhance the fabric's texture. Click here to purchase a premium Teflon sheet.
Alternative Pressing Methods
Using a Cricut Mini Press The Cricut Mini Press can be effective for DTF transfers with these adjusted settings:
  • Temperature: Set to Medium-High (approximately 300°F / 150°C)
  • Duration: 15-20 Seconds per section
  • Technique: Press in sections with firm pressure, overlapping areas to ensure complete coverage
  • Multiple Passes: May require 2-3 passes for optimal adhesion
Note: Due to the small surface area, you'll need to work in sections. Results may vary compared to a full-sized heat press.
Using a Home Iron While not ideal, a home iron can be used for DTF transfers when necessary:
  • Temperature: Cotton setting (no steam)
  • Duration: Press firmly for 30-45 seconds per section
  • Technique: Place a thin cotton cloth over the transfer before ironing
  • Pressure: Apply as much downward pressure as possible
  • Multiple Passes: Work in small sections, overlapping areas
Important: Wash results may vary significantly between materials when using a home iron. For best results, we recommend using a proper heat press. Need professional results? Rent a FREE heat press from us!

Heat Press Troubleshooting Guide

Solve common issues with your heat press quickly and easily

1

Prints Not Sticking

The number one reason is pressure. The press should be hard to push down. If not pressure, then your press is either too hot or too cold.

2

Press Too Cold

Test by touching your print for 2-3 seconds. If you can keep your hand there longer than that or it just feels warm, increase heat.

3

Press Too Hot

Touch the print and see if it is too hot to keep your hand there longer than 1 second. Do not burn yourself, just quickly touch and see if it is too hot to leave your finger.

4

Inaccurate Temperature

Many heat presses have inaccurate temperature gauges. We recommend using an infrared thermometer to verify your actual temperature and adjust accordingly.

5

Small Design Elements

For small parts of the design that may not be adhering properly, use a small flat surface or even a pencil eraser end to apply targeted pressure to those specific areas for better adhesion.

For more detailed troubleshooting assistance, please contact our support team.

Have Questions? We're Here to Help!
Matt@superdtf.com (206) 536-8835